BROIL SENSOTEK INDUSTRIES
Thermal mass flow meter insert type

Thermal mass flow meter insert type

Send Inquiry

BROILTECH Thermal mass flow meter for detection and metering the gas and air. Its work on principal of calorie amount taken away from the heated sensor by a fluid flow is calibrated to the mass of flow, Thermal mass flow meter use for measuring : air, nitrogen, argon, co2, chlorine, ethane, ethylene, methane, ammonia, helium, hydrogen, bio gas,

Technical specification

  • Type : Inline and Insertion
  • Medium : All kinds of gases (pure stable except for acetylene)
  • Accuracy : 1%
  • Repeatability : 0.2% full scale meter
  • Ambient Temperature : -40C to 50C
  • Medium Temperature : -40C to 260 C
  • Environmental Pressure : 1 MPa, 2.5 MPa
  • Protection : Water Proof, Explosion Proof
  • Material of construction : S.S. 316 (Standard) other on request
  • INLINE TYPE CONECTION : FLANGE ,

DISPLAY

Power voltage: 85 v ac – 250 v ac OR 24V DC 10%

display mode:

Liquid Crystal Display (LCD), as follows:

  • L XXX. X four instantaneous flow (m3 / h) or L/h
  • XX. XXXXXX eight cumulative flow (m3) or L
  • temperature reading
  • Cumulative flow: automatically expand the display precision, the cumulative flow values can be reset.
  • Power-fail protection: instrument coefficient, the Total flow values ten years is not lost when power supply drop.

output 

  • 3 wire pulse
  • 2 wire 4 to 20 mA
  • RS-485
  • HART